Nora lighting NHRPIC-18ELAT 6" 13W IC Remodel CFL Electronic Ballast Housing 120V-277V

In stock


NHRPIC-18ELAT Product Description

Remodel six inch housing for installation into existing sheet rock ceilings where access is only available from below the ceiling. May be in direct contact with thermal insulation and adjacent structural components. Rated for use with one quad or triple 4-pin compact fluorescent lamp. Adheres to the minimum lumens per watt ratio that qualifies to Energy Star Standards.

Housing: 0.040 steel housing adjusts to a maximum ceiling thickness of 5/8" (16mm). Housing terminates at a 1/4" ceiling flange for even positioning of housing angle within the ceiling. Structural arm consists of 0.050 steel and connects to housing with j-box and ballast. Integral springs brackets provided.

Air Flow Restriction: Air tight (AT) housings have factory installed gaskets to restrict airflow from room into ceiling plenum to <2CFM (cubic feet per minute) in accordance with ASTM-283 Air-Tight requirements.

Socket: One 4-pin convertible socket that can be converted from fixed to floating without tools.

Mounting: Four high tension tempered steel springs secure remodel housing to 5/8" thick (max) ceiling (Hole cutout template provided for convenience).

Junction Box: Prewired 25 cubic inch 0.064" thick galvanized steel, with five 1/2", two 3/4" knockouts, four Romex® pryouts, and snap on covers. All leads are #18AWG wire, the ground wire is connected to the bottom, and quick connectors are supplied on all leads. Through branch circuit wiring, (4-in
Write Your Own Review
You're reviewing:Nora lighting NHRPIC-18ELAT 6" 13W IC Remodel CFL Electronic Ballast Housing 120V-277V