Remodel six inch housing for installation into existing sheet rock ceilings where access is only available from below the ceiling. For use in non-insulated ceilings, where insulation can be kept 3" from fixtures. Rated for use with two quad 4-pin compact fluorescent lamps. Adheres to the minimum lumens per watt ratio that qualifies to Energy Star Standards.
CONSTRUCTION Housing: 0.040 Steel housing with die-cast formed galvanized socket cup attached to housing. Integral springs brackets provided.
Clearance: Non-IC housings require a minimum clearance of 3" from thermal insulation and 1/2" from adjacent building components.
Socket: Die-cast formed galvanized steel socket cup with two 4-pin sockets.
Mounting: Three high tension tempered steel springs secure remodel housing to 5/8" thick (max) ceiling (Hole cutout template provided for convenience).
Junction Box: Prewired 25 cubic inch 0.064" thick galvanized steel, with five 1/2", two 3/4" knockouts, four Romex® pryouts, and snap on covers. All leads are #18AWG wire, the ground wire is connected to the bottom, and quick connectors are supplied on all leads. Through branch circuit wiring, (4-in