Nora Lighting NHRP6-118EL 6" Single 18W Horizontal Architectural Quad Tube Compact Fluorescent Remodel Frame-In
SKU
NHRP6-118EL
In stock
NORA Lighting NHRP6-118EL
NHRP6-118EL Product Description
Architectural six inch horizontal down light rated for use with one quad tube lamp. For use in existing sheet rock ceilings where access is only available from below the ceiling. Use in non insulated ceiling, where insulation can be kept 3" from fixture, and 1/2" from adjacent building components. Adheres to the minimum lumens to watts ratio that qualifies to Energy Star.
CONSTRUCTION
Plaster Frame: Architectural quality 0.050 galvanized steel ring riveted to elevated 0.064 steel junction box and ballast tray.
Clearance
Non-IC frame-ins require a minimum clearance of 3" around from thermal insulation and 1/2" from combustible material from above the fixture.
Socket Cup
Die-cast formed galvanized steel with one 4-pin socket. The socket cup attaches to the finishing trim with two present screws that allow for minor rotation within two keyhole slots.
Mounting
Three high tension tempered steel springs secure remodel housing to 5/8" thick (max) ceiling (Hole cutout template provided for convenience).
Junction Box
Prewired 25 cubic inch 0.064" thick galvanized steel, with five 1/2", two 3/4" knockouts, four Romex® pryouts, and snap on covers. All leads are #18AWG wire, the ground wire is connected to the bottom, and quick connectors are supplied on all leads. Through branch circuit wiring, (4-in
Plaster Frame: Architectural quality 0.050 galvanized steel ring riveted to elevated 0.064 steel junction box and ballast tray.
Clearance
Non-IC frame-ins require a minimum clearance of 3" around from thermal insulation and 1/2" from combustible material from above the fixture.
Socket Cup
Die-cast formed galvanized steel with one 4-pin socket. The socket cup attaches to the finishing trim with two present screws that allow for minor rotation within two keyhole slots.
Mounting
Three high tension tempered steel springs secure remodel housing to 5/8" thick (max) ceiling (Hole cutout template provided for convenience).
Junction Box
Prewired 25 cubic inch 0.064" thick galvanized steel, with five 1/2", two 3/4" knockouts, four Romex® pryouts, and snap on covers. All leads are #18AWG wire, the ground wire is connected to the bottom, and quick connectors are supplied on all leads. Through branch circuit wiring, (4-in
Write Your Own Review
More from NORA Lighting
