Dedicated remodel housing for use in insulated ceilings can be in direct contact with insulation. Air-tight construction provides energy savings by reducing the flow of air through the ceiling. The housing is dedicated and labeled for use with PRISM, Cobalt, Marquise, Onyx series LED fixtures.
Housing: 0.040 aluminum housing adjusts to a maximum ceiling thickness of 5/8" (16mm). Housing terminates at a 1/4" ceiling flange for even positioning of housing angle within the ceiling. Structural arm consists of 0.050 steel and connects to housing with junction box. Integral spring brackets provided. Air Flow Restriction: Meets requirements of Air-Tight (AT) <2CFM (cubic feet per minute) in accordance with ASTM-283 Air-Tight requirements. Clearance: Ã¢â‚¬Å“ICÃ¢â‚¬Â Insulated ceiling housings are direct contact rated. Not to be used in direct contact with spray foam insulation. Mounting: Four high tension tempered steel springs secure remodel housing to 5/8" thick (max.) ceiling (Hole cutout template provided for convenience) Junction Box: P rewired 25 cubic inch 0.064" thick galvanized steel, with five 1/2", two 3/4" knockouts, four RomexÃ‚Â® payouts, and snap on covers. All leads are #18AWG wire, the ground wire is connected to the bottom, and quick connectors are supplied on all leads. Through branch circuit wiring, (4-in