Nora Lighting NHRIC-4LEDAT Remodel LED 4" Housing 120V
SKU
NHRIC-4LEDAT
In stock
NORA Lighting NHRIC-4LEDAT
NHRIC-4LEDAT Product Description
Dedicated remodel housings for use in insulated ceilings be in direct contact with thermal insulation. Airtight construction provides energy savings by reducing the flow of air through tie ceding. Each LED housing requires a Nora Lighting LED Trim. The LED driver is attached to the housing to allow easy of installation. Integrating Osram@ I.2W LEOS and exceeding Title 24 high efficacy requirements with savings of over 75% when compared with a 65W BR30.
IC rated for direct contact with insulation.
Quick connect provided for electrical connection the LED Trim.
ASTM E283 for Air-Tight
Title 24 Compliant
UL listed for through branch circuit Wiring.
UL listed for Wet Location.
Economical 2-wire dimming down to 3%.
50
Quick connect provided for electrical connection the LED Trim.
ASTM E283 for Air-Tight
Title 24 Compliant
UL listed for through branch circuit Wiring.
UL listed for Wet Location.
Economical 2-wire dimming down to 3%.
50
CONSTRUCTION
Housing: 0.040 steel rousing adjusts from 5/8" (Min) to maximum ceiling thickness of 1-5/8". Integral spring brackets remain flush with housing.
Mounting: Four high tension tempered steel springs secure the remodel housing evenly b 1-5/8" max. thickness of ceilings
Clearance: "IC" Insulated Ceiling housings are contact rated; no minimum clearance is required.
ELECTRICAL
LED Driver: 120V AC, 60Hz
Housing: 0.040 steel rousing adjusts from 5/8" (Min) to maximum ceiling thickness of 1-5/8". Integral spring brackets remain flush with housing.
Mounting: Four high tension tempered steel springs secure the remodel housing evenly b 1-5/8" max. thickness of ceilings
Clearance: "IC" Insulated Ceiling housings are contact rated; no minimum clearance is required.
ELECTRICAL
LED Driver: 120V AC, 60Hz
Write Your Own Review
More from NORA Lighting
