NORA Lighting NHRIC-27LMRAT 6" Shallow IC Air-Tight Dedicated Remodel Housing
SKU
NHRIC-27LMRAT
In stock
Dedicated remodel housing for use in shallow plenum, insulated ceilings can be in direct contact with insulation. Airtight construction provides energy savings by reducing the flow of air through the ceiling. The housing is dedicated and labeled for use with PRISM, Cobalt, Onyx and Opal series LED fixtures.
FEATURES:
Low 5-1/2" profile for existing shallow plenums
IC rated for direct contact with insulation
Quick connect provided for electrical connection to the LED reflectors
ASTM E283 for Air-Tight
SPECIFICATIONS:
Plaster Frame: High quality 0.040 steel die cut one piece frame.
Housing: 0.040 aluminum housing adjusts to a maximum ceiling thickness of 1-3/8". Housing terminates at 1/4" ceiling flange for even positioning of housing angle withing the ceiling. Structural arm consisting of 0.050 structural steel
connects housing with junction box. Spring brackets accept torsion wing trim springs; slots on socket plate surface accept standard coil springs.
Air Flow Restriction: Meets requirements of Air-Tight (AT) <2CFM (cubic feet per minute) in accordance with ASTM -283 Air-Tight requirements.
Clearance: “IC†Insulated ceiling housings are direct contact rated. Not to be used in direct contact with spray
foam insulation.
Mounting: Four high tension tempered steel springs secure remodel housing to a maximum ceiling thickness of 1-5/8".
Junction Box: Prewired 15 cubic inch 0.064" thick galvanized steel, with five 1/2", two 3/4" knockouts, four Romex® pryouts, and snap on covers. All leads are #18AWG wire, the ground wire is connected to the bottom, and quick connectors are supplied on all leads. Through branch circuit wiring, (4-in, 4-out).
Electrical
Voltage: 120V
Operating Temp.: 122ËšF (50ËšC) max. ambient temp. (with suitable reflectors)
Dimming: Triac / ELV, as specified on reflector / housing combination.
LABELS AND LISTINGS
cULus Listed for Damp location (Suitable for wet location with applicable reflector)
Can be used to comply with 2016 Title 24 - part 6 High Efficacy LED light source requirements when used with compatible reflector
WSEC ASTM E283 for Air-Tight
RoHS Compliant
FEATURES:
Low 5-1/2" profile for existing shallow plenums
IC rated for direct contact with insulation
Quick connect provided for electrical connection to the LED reflectors
ASTM E283 for Air-Tight
SPECIFICATIONS:
Plaster Frame: High quality 0.040 steel die cut one piece frame.
Housing: 0.040 aluminum housing adjusts to a maximum ceiling thickness of 1-3/8". Housing terminates at 1/4" ceiling flange for even positioning of housing angle withing the ceiling. Structural arm consisting of 0.050 structural steel
connects housing with junction box. Spring brackets accept torsion wing trim springs; slots on socket plate surface accept standard coil springs.
Air Flow Restriction: Meets requirements of Air-Tight (AT) <2CFM (cubic feet per minute) in accordance with ASTM -283 Air-Tight requirements.
Clearance: “IC†Insulated ceiling housings are direct contact rated. Not to be used in direct contact with spray
foam insulation.
Mounting: Four high tension tempered steel springs secure remodel housing to a maximum ceiling thickness of 1-5/8".
Junction Box: Prewired 15 cubic inch 0.064" thick galvanized steel, with five 1/2", two 3/4" knockouts, four Romex® pryouts, and snap on covers. All leads are #18AWG wire, the ground wire is connected to the bottom, and quick connectors are supplied on all leads. Through branch circuit wiring, (4-in, 4-out).
Electrical
Voltage: 120V
Operating Temp.: 122ËšF (50ËšC) max. ambient temp. (with suitable reflectors)
Dimming: Triac / ELV, as specified on reflector / housing combination.
LABELS AND LISTINGS
cULus Listed for Damp location (Suitable for wet location with applicable reflector)
Can be used to comply with 2016 Title 24 - part 6 High Efficacy LED light source requirements when used with compatible reflector
WSEC ASTM E283 for Air-Tight
RoHS Compliant
Low 5-1/2″ profile for existing shallow ceiling plenums
IC rated for direct contact with insulation
No above ceiling access required
Quick connect provided for electrical connection to the LED Trim
ASTM E283 for Air-Tight
cULus Listed for Damp Location
Dimmable
Installation-ready for existing sheet rock ceilings
Accommodates 1-5/8″ maximum ceiling thickness
IC rated for direct contact with insulation
No above ceiling access required
Quick connect provided for electrical connection to the LED Trim
ASTM E283 for Air-Tight
cULus Listed for Damp Location
Dimmable
Installation-ready for existing sheet rock ceilings
Accommodates 1-5/8″ maximum ceiling thickness
Family : Cobalt, Onyx, Opal
Write Your Own Review
More from NORA Lighting
