Sloped ceilings offers a clear path of unobstructed light from a 6/12 pitch (22-1/2 degree) ceiling to any floor or work plane. Standard construction allows use of larger higher wattage PAR38/R40 light source to deliver the greatest amount of illumination necessary for high ceilings and provides a clean finished appearance. Nora’s sloped housing is easy and quick to install and accepts standard down light or adjustable finishing trims. Also available as remodel.

Minimum Clearances: Non-IC housing requires minimum clearance of 3″ from thermal insulation and 1/2″ from adjacent building components

Maximum Slope Angle: Pitch: 6/12; Angle: 22-1/2 degrees

Ceiling Thickness: Ceiling thickness varies from 5/8″ – 1-3/8″

Lamp Adjustment: Three adjustment points allow slight tilt of housing cylinder with slide and tilt adjustments for the socket.

Installation: Bar hangers are adjustable from 13-5/8″ to 24″ and can be repositioned 90 degrees

Junction Box: Contains seven 1/2″ knockouts and four ROMEX® pryouts with strain relief

Electrical: Quick connector provided

Lamp Max: 150W (actual wattage varies with trim)

Dimensions:
Length: 13″
Width: 9-1/2″
Depth: 7″
Ceiling Opening: 6-1/2″ x 7″

LABELS AND LISTINGS
cULus Listed for damp locations