The Caséta T Wireless plug-in lamp dimmer controls lamp loads automatically through wireless sensors and wireless remote controls, providing a system that delivers energy savings, convenience, and ease of installation.
The Caséta T Wireless plug-in lamp dimmer uses Lutron R patented Clear Connect R RF Technology, which enables wireless communication with Radio Powr Savr T sensors and Pico R remote controls for total load control.
The Caséta T Wireless plug-in lamp dimmer provides dimming of multiple load types and allows remote control and occupancy/vacancy sensing when paired with wireless transmitting devices.
Lutron R patented Clear Connect R RF Technology works through walls and floors.
Dual-receptacle design allows dimming of two plug-in lamps (lamps controlled together).
Plug-in lamp dimmer ideal for retrofit applications.
Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.
Works with dimmable LEDs and CFLs as well as incandescent and halogen light bulbs.
Plug-in lamp dimmer can be converted to a switch to control non-dimmable loads.
FCC Approved. Complies with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules
Industry Canada certified
120 V~ 50/60 Hz
Tested to withstand electrostatic discharge without
damage or memory loss, in accordance with
Tested to withstand surge voltages without damage or
loss of operation, in accordance with
IEEE C62.41-1991 Recommended Practice on Surge
Voltages in Low-Voltage AC Power Circuits.
Dimmers always operate locally and do not require
Power failure memory: should power be interrupted,
the control will return to its previously set level prior to
the interruption when power is restored.
Green indicator LED.
The plug-in lamp dimmer communicates with PicoR
remote controls and Radio Power SavrT sensors
through radio frequency (RF).
The plug-in lamp dimmer must be located within 60 ft
(18 m) line-of-sight or 30 ft (9 m) through walls, of PicoR
remote controls and Radio Power SavrT sensors.
Up to ten transmitting devices may be associated to
each plug-in lamp dimmer.
Ambient operating temperature: 32 °F to 104 °F
(0 °C to 40 °C), 0%-90% humidity, non-condensing.
Indoor use only.