Lutron EC3DT442KU1S Electronic Ballast, 120/240/277 VAC Fluorescent T4 4-Pin Triple/Quad Tube Lamp for 42W 1-Light Fixture, 0.36 Amp/120V, 0.18 Amp/240V, 0.15 Amp/277 VAC
SKU
932367
In stock
- Ecosystem ballasts communicate via an ecosystem directly to sensors and controls
- Dims to 10 percent (5 percent for T4 ballasts)
- Compatible with 3-wire fluorescent controls
- Programmed rapid start design ensures full rated lamp life
- Lamps turn on to any dimmed level without flashing to full brightness
- Low harmonic distortion throughout the entire dimming range
- Operating frequency ensures ballast does not interfere with ir devices
- End-of-lamp-life protection circuitry ensures safe operation
- Ultra-quiet operation
- Non-volatile memory restores all ballast settings after power failure
- Ballasts maintain consistent light output for differing lamp lengths
- 100 percent performance tested at factory
- 5 year limited warranty
- Type: High Frequency
- Dimming Type: Continuous Flicker-Free 100 to 5 Percent
- Starting Type: Programmed Rapid
- Circuit Type: HPF
- Lamp Type: T4
- Lamp Style: 4-Pin Triple/Quad Tube
- Number Of Lamps: 1
- Lamp Wattage: 42 W
- Input Voltage: 120/240/277 VAC
- Input Current: 0.36 Ampere at 120 VAC, 0.18 Ampere at 240 VAC, 0.15 Ampere at 277 VAC
- Input Power: 43.2 W at 20 VAC, 42.7 W at 240 VAC, 42.6 W at 277 VAC
- Frequency Rating: 50/60 Hz
- Power Factor: 0.95
- Ballast Factor: 0.95
- Maximum THD: 10 Percent
- Minimum Starting Temperature: 50 Deg F
- Wiring: Series
- Size: 4.9 Inch L x 3 Inch W x 1 Inch H
- Approval: UL, CSA, FCC
- Applicable Standard: ANSI C82.11, ANSI C62.41, ANSI/ESD S20.20, ISO 9001
- Studded
- Standby Power: 1 W
- Maximum Inrush Current: 7 Ampere at 120 VAC/3 Ampere at 277 VAC
- Maximum Ballast Case Temperature: 75 Deg C
- Sound Rating Class: A
| Short Name | Lutron EC3DT442KU1S 120-277V Lamp Dimming Ballast |
|---|
Write Your Own Review
More from Lutron
