ELCO Lighting EL5LVICA 5 Inch Low Voltage Airtight IC Housing
SKU
EL5LVICA
In stock
ELCO Lighting EL5LVICA
EL5LVICA Product Description
5" Low Voltage Airtight IC Housing
Double wall IC construction, for use in insulated
ceilings.
Trims sold separately.
Lamp: 50W MAX, 12V, MR16 GU/GX5.3 bi-pin
LED/Halogen (not included).
Lamp Holder: MR16 GU/GX5.3 bi-pin socket.
Note: Use only dimmers specifically designed for use
with magnetic transformers. Low voltage luminaires
may produce audible sound when used with dimmers.
ceilings.
Trims sold separately.
Lamp: 50W MAX, 12V, MR16 GU/GX5.3 bi-pin
LED/Halogen (not included).
Lamp Holder: MR16 GU/GX5.3 bi-pin socket.
Note: Use only dimmers specifically designed for use
with magnetic transformers. Low voltage luminaires
may produce audible sound when used with dimmers.
Wattage 50W
Voltage 120V
Lamp Type GU5.3 BiPin
Damp LocationListed
Construction
Double wall IC rated for direct contact with insulation, for use in IC or non-IC conditions.
Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness.
Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
Steel housing for greater heat dissipation. Stamped galvanized steel frame.
Installation
Designed for ceiling plenums where 2x8 joists or taller joists are used. High strength hanger bars can easilty be nailed to joists. Maximum hole cutout is 5 1/2". Suitable for T-grid and drop ceiling applications. See installation sheet for detailed information.
Junction Box
Positioned to accommodate straight conduit runs. Seven 1/2" trade size conduit knockouts, four 3/4" knockouts with pry-out knockout slots. 4 Romex pryouts with strain relief.
Hanger Bars
Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber,
engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housings with the joists.
Electrical
Input Voltage: 120V AC.
Output Voltage: 12V AC.
Thermally protected against improper lamping.
Trims
Compatible with ELCO 5" MR16 trims.
Dimmability
See dimming compatibility list for a full list of compatible dimmers.
Note: Lamp used may affect dimmabilty.
Lamp
Designed for use with GU5.3 MR16 LED lamps.
Warranty
ELCO Lighting warrants products will be free from defects in materials and workmanship for a
period of 3 years.
Voltage 120V
Lamp Type GU5.3 BiPin
Damp LocationListed
Construction
Double wall IC rated for direct contact with insulation, for use in IC or non-IC conditions.
Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness.
Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
Steel housing for greater heat dissipation. Stamped galvanized steel frame.
Installation
Designed for ceiling plenums where 2x8 joists or taller joists are used. High strength hanger bars can easilty be nailed to joists. Maximum hole cutout is 5 1/2". Suitable for T-grid and drop ceiling applications. See installation sheet for detailed information.
Junction Box
Positioned to accommodate straight conduit runs. Seven 1/2" trade size conduit knockouts, four 3/4" knockouts with pry-out knockout slots. 4 Romex pryouts with strain relief.
Hanger Bars
Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber,
engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housings with the joists.
Electrical
Input Voltage: 120V AC.
Output Voltage: 12V AC.
Thermally protected against improper lamping.
Trims
Compatible with ELCO 5" MR16 trims.
Dimmability
See dimming compatibility list for a full list of compatible dimmers.
Note: Lamp used may affect dimmabilty.
Lamp
Designed for use with GU5.3 MR16 LED lamps.
Warranty
ELCO Lighting warrants products will be free from defects in materials and workmanship for a
period of 3 years.
About Elco Lighting
Founded in 1991 by its president, Steve Cohen, ELCO Lighting develops and markets lighting products for commercial and residential applications. Founded on the philosophy that high-quality commercial and residential lighting should be sold at a fair market price, Elco Lighting has designed and engineered lighting for residential and commercial spaces for almost two decades. Their product line includes track and recessed lighting fixtures, exit and emergency lights, undercabinet lighting, wall packs, step lights and more.Write Your Own Review
More from ELCO Lighting
