ELCO Lighting E5SQLFU20 5" IC Shallow Frame with Driver 2000lm Mapleâ„¢ Light Engines
SKU
E5SQLFU20
In stock
Elco Lighting E5SQLFU20
E5SQLFU20 Product Description
5" IC Frame for Mapleâ„¢ System LED Light Engines. For use in Insulted Ceilings, Damp Location rated and Wet Location rated with applicable LED Light Engines. For use in Insulated Ceilings with ELCO 5" Mapleâ„¢ System LED Light Engines.
Dimmable Triac/ELV (1100 lm units), 0-10V (2000 lm units).
Optional Emergency Backup 90 minutes, 120/277 VAC, 60Hz.
High Efficiency Driver mounted on J-box for greater lumen output and easy access from below the ceiling.
Suitable for wet location covered ceiling only with E520/E524 Light Engines (ordered separately).
2â…ž" Height Allows for installation in shallow ceilings (when used with non adjustable light engines).
ENERGY STAR® Certified. California Title 24 (JA8-2016).
Dimmable Triac/ELV (1100 lm units), 0-10V (2000 lm units).
Optional Emergency Backup 90 minutes, 120/277 VAC, 60Hz.
High Efficiency Driver mounted on J-box for greater lumen output and easy access from below the ceiling.
Suitable for wet location covered ceiling only with E520/E524 Light Engines (ordered separately).
2â…ž" Height Allows for installation in shallow ceilings (when used with non adjustable light engines).
ENERGY STAR® Certified. California Title 24 (JA8-2016).
Wattage : 16W - 28W
Voltage : 120/277V
Dimmable : Triac/ELV or 0-10V
Wet Location : Listed with E520/E524 Inserts
Damp Location : Listed
Construction: IC Rated for Direct Contact with Insulation with E52 Mapleâ„¢ System LED Light Engines. Stamped galvanized steel frame.
Installation: Designed for shallow ceiling plenums where 2x4 joists or taller are used. Suitable for T-grid and drop ceiling applications. Driver mounted on junction box for cooler LED operation.
Junction Box: 16 gauge pre-wired galvanized steel Junction Box, 25 cubic-inch for a maximum of (8) #12 AWG wires. Positioned to accommodate straight conduit runs. Furnished with seven 1/2†trade size conduit pry-out knockouts, four 3/4†pry-out knockouts, one 1" pry-out knockout and (4) Romex pry-outs with strain relief. Strain clamps to install or remove covers for easy access and grounding.
Hanger Bars: Pre Installed high strength hanger bars with True Nail easy installation in regular lumber, engineered lumber, and Laminated Beams. Integral T-Bar slots for easy installation in T-Bars. Spans up 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while easily aligning the housings with the joists.
Electrical: Driver is rated for 120V and 277V input (120/277V). High efficiency, high power factor > 0.9 driver.
Dimmability: Flicker-Free Dimming. E5SQLFU11 works with Triac/ELV type dimmers. E5SQLFU20 works with 0-10V dimmers. Smoothly dims down to 10%. (Dimming range may vary depending on dimmer model). For full list of dimmers refer to the Dimmer Compatibility List.
Warranty: ELCO Products are built to last. 5-year Limited warranty.
Labels and Listings:
UL/cUL Listed for Damp Location and for Wet Location with select light engines;
Listed for Direct Contact with Insulation and Combustible Material;
Listed for Feed Through.
Inserts meet restricted air flow requirements (Per ASTM E-283).
Voltage : 120/277V
Dimmable : Triac/ELV or 0-10V
Wet Location : Listed with E520/E524 Inserts
Damp Location : Listed
Construction: IC Rated for Direct Contact with Insulation with E52 Mapleâ„¢ System LED Light Engines. Stamped galvanized steel frame.
Installation: Designed for shallow ceiling plenums where 2x4 joists or taller are used. Suitable for T-grid and drop ceiling applications. Driver mounted on junction box for cooler LED operation.
Junction Box: 16 gauge pre-wired galvanized steel Junction Box, 25 cubic-inch for a maximum of (8) #12 AWG wires. Positioned to accommodate straight conduit runs. Furnished with seven 1/2†trade size conduit pry-out knockouts, four 3/4†pry-out knockouts, one 1" pry-out knockout and (4) Romex pry-outs with strain relief. Strain clamps to install or remove covers for easy access and grounding.
Hanger Bars: Pre Installed high strength hanger bars with True Nail easy installation in regular lumber, engineered lumber, and Laminated Beams. Integral T-Bar slots for easy installation in T-Bars. Spans up 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while easily aligning the housings with the joists.
Electrical: Driver is rated for 120V and 277V input (120/277V). High efficiency, high power factor > 0.9 driver.
Dimmability: Flicker-Free Dimming. E5SQLFU11 works with Triac/ELV type dimmers. E5SQLFU20 works with 0-10V dimmers. Smoothly dims down to 10%. (Dimming range may vary depending on dimmer model). For full list of dimmers refer to the Dimmer Compatibility List.
Warranty: ELCO Products are built to last. 5-year Limited warranty.
Labels and Listings:
UL/cUL Listed for Damp Location and for Wet Location with select light engines;
Listed for Direct Contact with Insulation and Combustible Material;
Listed for Feed Through.
Inserts meet restricted air flow requirements (Per ASTM E-283).
About Elco Lighting
Founded in 1991 by its president, Steve Cohen, ELCO Lighting develops and markets lighting products for commercial and residential applications. Founded on the philosophy that high-quality commercial and residential lighting should be sold at a fair market price, Elco Lighting has designed and engineered lighting for residential and commercial spaces for almost two decades. Their product line includes track and recessed lighting fixtures, exit and emergency lights, under cabinet lighting, wall packs, step lights and more.Write Your Own Review
More from ELCO Lighting
