ELCO Lighting E450 4 inch Housing with Plaster Frame for Remote Transformer for MR16 Bi-Pin
SKU
E450
In stock
ELCO Lighting E450
E450 Product Description
4" Housing with Plaster Frame for Remote Transformer for MR16 Bi-Pin
4" housing with Plaster Frame and MR16 Socket.
For use with remote transformer.
Lamp: 50W MAX 12V MR16 GU/GX5.3 bi-pin
LED/Halogen (not included).
Lamp Holder: MR16 GU/GX5.3 bi-pin socket.
Can be used with most 4" Low Voltage trims (not
included).
For use with remote transformer.
Lamp: 50W MAX 12V MR16 GU/GX5.3 bi-pin
LED/Halogen (not included).
Lamp Holder: MR16 GU/GX5.3 bi-pin socket.
Can be used with most 4" Low Voltage trims (not
included).
Wattage 35W
Voltage 120V
Lamp Type GU5.3 BiPin
Damp LocationListed
Construction:
Single wall new construction.
Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness.
Steel housing for greater heat dissipation. Stamped galvanized steel frame.
Installation
Designed for ceiling plenums where 2x6 joists or taller joists are used. High strength hanger bars can easilty be nailed to joists. Maximum hole cutout is 4 1/4". Suitable for T-grid and drop ceiling applications. See installation sheet for detailed information.
Junction Box
Positioned to accommodate straight conduit runs. Seven 1/2" trade size conduit knockouts, four 3/4" knockouts with pry-out knockout slots. 4 Romex pryouts with strain relief.
Hanger Bars
Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber,
engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housings with the joists.
Electrical
Input Voltage: 120V AC.
Output Voltage: 12V AC.
Thermally protected against improper lamping.
Trims
Compatible with ELCO 4" MR16 trims.
Lamp
Designed for use with GU5.3 MR16 lamps
Listings
UL Listed for Damp Location. UL Listed for Feed Through.
Voltage 120V
Lamp Type GU5.3 BiPin
Damp LocationListed
Construction:
Single wall new construction.
Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness.
Steel housing for greater heat dissipation. Stamped galvanized steel frame.
Installation
Designed for ceiling plenums where 2x6 joists or taller joists are used. High strength hanger bars can easilty be nailed to joists. Maximum hole cutout is 4 1/4". Suitable for T-grid and drop ceiling applications. See installation sheet for detailed information.
Junction Box
Positioned to accommodate straight conduit runs. Seven 1/2" trade size conduit knockouts, four 3/4" knockouts with pry-out knockout slots. 4 Romex pryouts with strain relief.
Hanger Bars
Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber,
engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-bars. Spans up to 24" and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person installation while aligning the housings with the joists.
Electrical
Input Voltage: 120V AC.
Output Voltage: 12V AC.
Thermally protected against improper lamping.
Trims
Compatible with ELCO 4" MR16 trims.
Lamp
Designed for use with GU5.3 MR16 lamps
Listings
UL Listed for Damp Location. UL Listed for Feed Through.
About Elco Lighting
Founded in 1991 by its president, Steve Cohen, ELCO Lighting develops and markets lighting products for commercial and residential applications. Founded on the philosophy that high-quality commercial and residential lighting should be sold at a fair market price, Elco Lighting has designed and engineered lighting for residential and commercial spaces for almost two decades. Their product line includes track and recessed lighting fixtures, exit and emergency lights, undercabinet lighting, wall packs, step lights and more.Write Your Own Review
More from ELCO Lighting
